Optional Insp. Services
Home | :: About Us | :: Services | :: Needs Theory | :: Mission Statement | :: Request a Quote | :: Contact | :: Staff

Home
:: About Us
:: Services
:: Needs Theory
:: Mission Statement
:: Request a Quote
:: Contact
:: Staff

Services

Inspections
Paint & Incidental Repairs
Maintenance Contracts

 

 

 

 

INSPECTIONS

OPTIONAL SERVICES

Description of Optional Services

 Ultra Sonic (UT) Testing - provides measurement of Metal Thickness

The Ultra Sonic test is performed using a small handheld machine that shoots an ultra sonic beam through the exterior paint and the underlying metal. The beam reflects back from the interior side of the metal and provides a readout in numerical form. The interior coating, if any, is not measured. The exterior coating or paint, is measured. The inspector must make an educated guess as to the ‘remaining’ thickness of the metal. Therefore, one can presume with consistently low readings that the tank has substantially deteriorated, through the formation of pits, rust, scale, etc. Random low readings are not uncommon nor should be cause for alarm.

 Adhesion Testing - provides indication of quality of existing coating

The Cross Hatch test or Adhesion test if performed by physically cutting into the existing coating to determine the percentage of material (paint) that remains firmly in place on the metal structure. This will allow an indication of life expectancy of the coating (paint).

 Mil Thickness Testing - provides measurement of existing coating

Coatings (i.e. paint) are measured in units of ‘mils’ of DFT (dry film thickness). For example, exterior enamel on steel structures applied by the method of one coat of primer and 2 finish coats of enamel should range approximately 6 to 8 mils DFT. The coating is measured after the coating has had time to ‘cure’, usually 10 days of reasonably warm and low humidity conditions. Five mils DFT, is recognized as the minimal approved thickness of coatings on steel, to provide adequate protection against deterioration.
 

   

Std Visual/Ultra-Sonic
Clean-Out Inspections
NFPA Inspection
Commercial Dive
Optional Insp. Services

 

Inspections ] Paint & Incidental Repairs ] Maintenance Contracts ]